How to Reset a Compass on an Origo Watch
- 1). Press the "Mode" button (located in the bottom-left corner of your Origo watch) one time to leave "Time" mode and enter "Compass" mode.
- 2). Press and hold the "Start/Stop" key (located on the top-right side of your Origo watch) for two seconds while in compass mode. "Cal" and "Hold" will appear in digital text on the screen. At this point the calibration of the compass will start.
- 3). Hold the Origo watch in a level position and rotate clockwise one complete rotation. Be sure to take your time with the rotation, as it needs to last for at least thirty seconds.
- 4). Wait until the screen jumps from the compass display to the declination angle adjustment display. This is a display screen that details which direction you are currently facing. Press the "Mode" button again to bypass the declination angle display screen.
- 5). Wait for "Cal" and "End" to appear on the screen in digital text. This confirms that your digital compass is reset and calibrated. You can now exit the compass screen by pressing the "Mode" button again.
Source...